10 03 28Non-hazardousMirror

Wastes from cooling-water treatment other than those mentioned in 10 03 27

10 03 28 is a UK List of Wastes (EWC) classification code. Record this exact code on the Waste Transfer Note whenever the waste is collected or transferred.

This is classed as non-hazardous waste. It still needs a Waste Transfer Note when transferred, and can only go to a site authorised to accept it. If the waste is contaminated with dangerous substances a different, hazardous code may apply.

This is a mirror entry. It is one of a pair: one code for this waste when it contains dangerous substances, and one for the same waste when it does not. This is the non-hazardous half, so it only applies once you have checked the load is not contaminated above the concentration limits. If it is, the paired hazardous code applies instead. The limits are in the government's WM3 technical guidance, and working out which half applies is the producer's and the carrier's own duty of care.

Other codes in sub-chapter 10 03: Wastes from aluminium thermal metallurgy

10 03 02Anode scraps10 03 04HazardousPrimary production slags10 03 05Waste alumina10 03 08HazardousSalt slags from secondary production10 03 09HazardousBlack drosses from secondary production10 03 15MirrorHazardousSkimmings that are flammable or emit, upon contact with water, flammable gases in hazardous quantities10 03 16MirrorSkimmings other than those mentioned in 10 03 1510 03 17HazardousTar-containing wastes from anode manufacture10 03 · Wastes from aluminium thermal metallurgy10 03 18Carbon-containing wastes from anode manufacture other than those mentioned in 10 03 1710 03 19MirrorHazardousFlue-gas dust containing hazardous substances10 03 · Wastes from aluminium thermal metallurgy10 03 20MirrorFlue-gas dust other than those mentioned in 10 03 1910 03 21MirrorHazardousOther particulates and dust (including ball-mill dust) containing hazardous substances10 03 22MirrorOther particulates and dust (including ball-mill dust) other than those mentioned in 10 03 2110 03 23MirrorHazardousSolid wastes from gas treatment containing hazardous substances10 03 · Wastes from aluminium thermal metallurgy10 03 24MirrorSolid wastes from gas treatment other than those mentioned in 10 03 2310 03 25MirrorHazardousSludges and filter cakes from gas treatment containing hazardous substances10 03 · Wastes from aluminium thermal metallurgy10 03 26MirrorSludges and filter cakes from gas treatment other than those mentioned in 10 03 2510 03 27MirrorHazardousWastes from cooling-water treatment containing oil10 03 · Wastes from aluminium thermal metallurgy10 03 29MirrorHazardousWastes from treatment of salt slags and black drosses containing hazardous substances10 03 30MirrorWastes from treatment of salt slags and black drosses other than those mentioned in 10 03 2910 03 99Wastes not otherwise specified10 03 · Wastes from aluminium thermal metallurgy

Find the other 172 codes in chapter 10 in the EWC finder

This free tool lists the complete UK List of Wastes. It is for reference — always confirm the correct code before transferring waste. For the rules on classifying and assessing hazardous waste, see the official gov.uk waste classification guidance. Always confirm the correct code before transferring waste.

What is an EWC code?

An EWC code (European Waste Catalogue code, also called a List of Wastes or LoW code) is the six-digit reference used across the UK and EU to classify a type of waste. Every controlled-waste transfer — from a single skip to a full commercial collection — must record the correct code on its Waste Transfer Note.

The six digits work in three pairs. The first pair is the chapter (the industry or source the waste came from), the second pair narrows it to a sub-chapter, and the third pair identifies the specific waste type. A code ending in an asterisk (*) is hazardous and carries extra handling, carrier and documentation duties.

Some codes are absolute, which means the waste is hazardous (or not) whatever happens to be in the particular load. Others are mirror entries, and those come in pairs: one code for the waste when it contains dangerous substances, one for the same waste when it does not. Which half of the pair applies is settled by assessing what is in the load against the concentration limits in the government's WM3 guidance, so the code on its own does not answer it.

From October 2027, carriers, brokers and dealers must record waste movements digitally under DEFRA's Digital Waste Tracking service, and an accurate EWC code is the backbone of every record.

Get the next guide by email

We write a plain-English guide whenever the Digital Waste Tracking rules move, and these reference pages get updated with them. Leave your email and the next one comes to you.

We never sell or share your address. See our privacy notice.

Start on the free plan

CarrierNote is on the GOV.UK software provider list, connected to DEFRA's Digital Waste Tracking service. Receiving sites are in scope from October 2026 and carriers from October 2027, and you can be recording to DEFRA's standard from your first load, whenever you start.